Avo madio 99.95% ho an'ny indostrian'ny angovo atomika.
Paramètre vokatra
| Anaran'ny vokatra | 99.95% Tantalum ingot bar mpividy ro5400 tantalum vidiny |
| fahadiovana | 99,95% min |
| kilasy | R05200, R05400, R05252, RO5255, R05240 |
| Malagasy | ASTM B365 |
| Size | Dia(1~25)xMax3000mm |
| toe-javatra | 1. Hot-rolled / Cold-rolled; 2. Fanadiovana Alkaline; 3. Electrolytika poloney; 4.Machining, fitotoana; 5. Fanamaivanana ny adin-tsaina. |
| Fananana mekanika (Annealed) | Grade; Henjana min; Elongation min, % |
| (UNS), psi (MPa), psi (MPa) (2%), (1in. halavan'ny gage) | |
| (RO5200, RO5400), 30000 (207), 20000 (138), 20 | |
| Ta-10W (RO5255), 70000 (482), 60000 (414),15 | |
| Ta-2.5W (RO5252), 40000 (276), 30000 (207), 20 | |
| Ta-40Nb (RO5240), 35000 (241), 20000 (138), 25 | |
| vokatra namboarina | Araka ny sary, fepetra manokana ifanarahan'ny mpamatsy sy ny mpividy. |
famaritana
| savaivony | Fandeferana savaivony | NY FAHARETANY | fandeferana | |||
| tehina forging | Extruded Rods | tsora-kazo | tsorakazo tany | |||
| 3.0-4.5 | ±0.05 | - | ±0.05 | - | 500-1500 | + 5 |
| >4.5-6.5 | ±0.10 | - | ±0.10 | - | 500-1500 | + 5 |
| >6.5-10.0 | ±0.15 | - | ±0.15 | - | 400-1500 | + 5 |
| >10-16 | ±0.20 | - | ±0.20 | - | 300-1200 | + 5 |
| >16-18 | ±1.0 | - | - | ±0.30 | 200-2000 | + 20 |
| >18-25 | ±1.5 | ±1.0 | - | ±0.40 | 200-2000 | + 20 |
| >25-40 | ±2.0 | ±1.5 | - | ±0.50 | 150-4000 | + 20 |
| >40-50 | ±2.5 | ±2.0 | - | ±0.60 | 100-3000 | + 20 |
| >50-65 | ±3.0 | ±2.0 | - | ±0.80 | 100-1500 | + 20 |
TabilaoⅠSimika firafitry ny Tantalum Rod
| Chemistry ppm | ||||||||||||
| Description | singa lehibe | Fahalotoana ambony indrindra | ||||||||||
| Ta | Nb | Fe | Si | Ni | W | Mo | Ti | O | C | H | N | |
| Ta1 | sisa | 300 | 40 | 30 | 20 | 40 | 40 | 20 | 150 | 40 | 15 | 20 |
| Ta2 | sisa | 800 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
| TaNb3 | sisa | <35000 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
| TaNb20 | sisa | 170000- 230000 | 100 | 100 | 50 | 200 | 200 | 50 | 200 | 100 | 15 | 100 |
| Ta2.5W | sisa | 400 | 50 | 30 | 20 | 30000 | 60 | 20 | 150 | 50 | 15 | 60 |
| Ta10W | sisa | 400 | 50 | 30 | 20 | 110000 | 60 | 20 | 150 | 50 | 15 | 60 |
Tabilao Ⅱ Fanovàna azo atao amin'ny savaivony ho an'ny tsorakazo Tantalum
| Savaivony, santimetatra (mm) | Fandeferana, +/-inch (mm) |
| 0.125~0.187 afa-tsy (3.175~4.750) | 0.003 (0.076) |
| 0.187~0.375 afa-tsy (4.750~9.525) | 0.004 (0.102) |
| 0,375~0,500 tsy misy (9,525~12,70) | 0.005 (0.127) |
| 0,500~0,625 afa-tsy (12,70~15,88) | 0.007 (0.178) |
| 0,625~0,750 afa-tsy (15,88~19,05) | 0.008 (0.203) |
| 0.750~1.000 tsy misy (19.05~25.40) | 0.010 (0.254) |
| 1.000~1.500 tsy misy (25.40~38.10) | 0.015 (0.381) |
| 1.500~2.000 tsy misy (38.10~50.80) | 0.020 (0.508) |
| 2.000~2.500 excl (50.80~63.50) | 0.030 (0.762) |
Fampiharana
Capacitors; implants sy fitaovana fandidiana; ranomainty nozzles.
Ampiasaina amin'ny fitaovana laboratoara.
Ampiasaina ho solon'ny platinum.
Ampiasaina amin'ny famokarana super alloys sy electron-beam melting.
vokatra mifandraika
-
Vovoka molybdène boribory avo lenta Ultraf...
Ny singa simika Mo ≥99.95% Fe <0.005% Ni <0.003% Cu <0.001% Al <0.001% Si <0.002% Ca <0.002% K <0.005% Na <0.001% Mg <0.001% Mn <0.001% W <0.001% Pb <0.0005% Bi <0.0005% Sn <0.0005% Sb <0.001% Cd <0.0005% P <0.001% S <0.002% C <0.005% O 0.03~0.2% Tanjona High molybdène madio, semico...mammography
-
High Density namboarina mora vidy Pure Tungst ...
Product parameters Tungstène Block Polisy 1kg Tungstène Cube 38.1mm Purity W≥99.95% Standard ASTM B760, GB-T 3875, ASTM B777 Surface Ground Surface, Machined surface Density 18.5 g/cm3 --19.2 g/cm3 Dimensions Common habe:7.2 g/cm3. * 12.7mm20 * 20 * 20mm 25.4 * 25.4 * 25.4mm 38.1 * 38.1 * 38.1mm Fampiharana Haingo, haingon-trano, Balance lanja, birao, fanomezana, tanjona, Miaramila indostria, sy ny sisa Ny c...
-
Fahadiovana avo 99,95% w1 w2 Wolfram Melting Metal ...
Ny mari-pamantarana vokatra Anaran'ny mari-pana avo 99.95% Pure tungstène crucible mitsonika vidin'ny tungstène madio W Purity: 99.95% Other Material W1,W2,WAL1,WAL2,W-Ni-Fe, W-Ni-Cu,WMO50,WMO20 Density 1. Sintering tungstène crucible Density: 18.0 - 18.5 g/cm3; 2. Forging tungstène crucible Density: 18.5 - 19.0 g / cm3 Dimension & Cubage Araka ny filanao na sary Fotoana fandefasana 10-15 andro Fampiharana Ampiasaina betsaka amin'ny ...
-
Toy ny singa fanangonana voapoizina ambonin'ny Nb Pure ...
Product Parameter Anaran'ny vokatra Ingot Niobium madio Material Niobium madio sy firaka niobium Remende araka ny fangatahanao Grade RO4200.RO4210,R04251,R04261 Process Cold rolled, Hot rolled, Extruded toetra Fandrefesana : 2468 ℃ Teboka mangotraka : 4744 ℃ Fampiasana betsaka amin'ny simika. , elektrônika, fiaramanidina ary aerospace Endri-javatra vokatra Fandrefesana tsara amin'ny harafesina.
-
HSG Metal Sarobidy 99.99% Purity Black Pure Rho...
Fanondroana ara-teknika fototra Anaran'ny vokatra Rhodium vovoka CAS No. 7440-16-6 Synonyms Rhodium; RHODIUM BLACK; ESCAT 3401; Rh-945; RHODIUM METAL; Firafitry ny molekiola Rh lanja molekiola 102.90600 EINECS 231-125-0 Votoatin'ny rhodium 99.95% Fitehirizana Ny trano fanatobiana dia hafanana ambany, misy rivotra ary maina, tsy misy lelafo, anti-static. .
-
Astm B392 r04200 Type1 Nb1 99.95% Niobium Rod P...
Ny mari-pamantarana vokatra Anaran'ny vokatra ASTM B392 B393 High Purity Niobium Rod Niobium Bar miaraka amin'ny vidiny tsara indrindra Nb ≥99.95% Grade R04200, R04210, R04251, R04261, Nb1, Nb2 Standard ASTM B392 Haben'ny mari-pahaizana mari-pahaizana 246 Bograde mari-pahaizana mari-pahaizana 246 Bograde. ♦ Haavo ambany sy tanjaka voafaritra tsara♦ Fiatrehana harafesina tsara ♦ fanoherana tsara amin'ny fiantraikan'ny hafanana ♦ Nonmagnetika sy tsy misy poizina...